🔋 Air-Cooled 3S2P LiPo Battery Case for HPI RS4 Nitro Chassis – Electrical Conversion Improve (Customized STL)・ 3D File for 3D printing・Cults

🔥 Transformed your HPI RS4 Nitro to electrical? This tradition-designed battery case not solely suits completely—it actively cools your LiPo with a fan-aligned air duct system!
💨 Good airflow = safer, cooler, and higher RC efficiency!

This can be a custom-designed LiPo battery case made particularly for these changing the HPI RS4 Nitro chassis to an electrical setup.
The design suits exactly into the unused right-hand compartment of the chassis and is optimized to carry a 3S2P LiPo battery (3000mAh complete) utilizing 70x35x10 mm cells.

💨 Probably the most spectacular function? Energetic air cooling.
The highest-mounted twin followers on the motor align completely with the air consumption of this battery case.
This was deliberately designed throughout growth to create a direct airflow channel into the case, cooling the battery internally.
Facet vents on each ends assist push the recent air out, guaranteeing steady, cooler battery efficiency underneath load.

🧠 The result’s a novel mixture of type, perform, and efficiency—perfect for RC drift builders and tinkerers.
It’s been examined and put in on my private {custom} RS4 electrical conversion with nice outcomes.

🔩 Key Options:

-Suits HPI RS4 Nitro chassis (transformed to electrical)
-Designed for 70x35x10 mm LiPo cells (3S2P – 6 cells complete, 3000mAh)
-Air duct aligned with twin motor cooling followers
-Facet vent holes for environment friendly warmth exhaust
-Print-friendly STL – no helps required normally
-Mount with screws, adhesive, or zip ties

🔋 Battery used on this construct:
👉 [https://www.motorobit.com/37v-1s-1500mah-45c-lipo-batarya]

🔹 Brushless Motor Used:
Mannequin: RCX-AZ 3650 3600KV
Compact, excessive RPM brushless motor, perfect for 1/10 scale electrical conversions.

🔹 Cooling Followers Used:
Sort: Twin 30mm 5V Brushless Followers
Mounted on {custom} heatsink over motor, instantly aligned with battery case air duct. Offers steady airflow for battery cooling.

📦 Obtain Consists of:

-STL file (battery case physique)
-Non-compulsory readme / printing ideas
-Non-commercial use license (except famous in any other case)

💬 Why You’ll Love This:

✅ Constructed particularly for RS4 Nitro conversions
✅ Energetic cooling through motor fan = longer battery life
✅ Totally examined and confirmed in a working RC drift automotive
✅ Provides {custom} efficiency & engineering type to your construct
✅ No guesswork – measured and modeled right down to the millimeter