Free STL file Over-The-Ear Headphone Wrap 🎧 ・3D printing mannequin to obtain・Cults

There are many headphone wrap designs however for ear buds, I couldn’t discover one for Over-the-Ear model of headphones so I design one and I’m nonetheless engaged on it however it’s useful sufficient that I exploit it now for each run. It’s most likely over-engineered (however I nonetheless will engineer it extra) and actually too giant however that has not been an issue like I believed it would. I needed to design a spot to carry the three.5mm jack to USB-C adapter as a result of my telephone required it. I like collaboration or remixing so please be at liberty if you wish to make some adjustments for you. I’m not going to cost for one thing which may assist somebody take up an exercise, like working…

There’s a correct approach, in accordance with the designer (me) to wrap up the adapter, headphones, and twine. The adapter has to go in first with the spherical finish inserted into the slotted facet unit the USB portion “locks” into place,.

The earphones are then inserted with the speaker portion going through away from the mannequin virtually a full twist till the speaker additionally “locks” into place, after that the ear-wrap half will also be pressed towards the mannequin to “lock” in place.

There are two lengthy slots made for the wire portion from the speaker to go in to and a notch for them to remain collectively to allow them to wrap across the skinny a part of the mannequin.

After wrapping the entire wire the remaining 3.5mm TRS plug goes into the closest gap for securing. This final half was unintentional (not deliberate) however labored out very well.

Higher photographs to return within the subsequent few days.

I designed this in Strong-Works and printed all of the fashions on my Bambu Labs A1 in PLA, ABS possibly a more sensible choice however the mannequin I’m utilizing now I nonetheless contemplate a useful prototype. I makes use of commonplace decision and printed with the mannequin standing tall on the flat half, undoubtedly use Tree (auto) for help, they arrive off with out an excessive amount of effort for those who use diagonal cutters and tweezers.