E3D HotEnd Comparability Information | MatterHackers

Usually imitated, however by no means duplicated, E3D HotEnds are the results of high quality engineering. They’re the envy of sizzling finish makers all over the place as a result of E3D has one way or the other discovered the successful design, machined to perfection. Purchase an off-brand replication on eBay, and chances are high good that you simply’ll remorse it as a result of vendor’s lack of ability to recreate the precise specs that E3D has gone to such lengths to get good.

Because of this, E3D HotEnds are the popular improve for the techs right here at MatterHackers, and we wholeheartedly advocate them, in addition to their many nozzle replacements, to our clients.

The versatile E3D v6 All-metal HotEnd

E3D v6 HotEnd

The E3D v6 is the quintessential improve to any printer that’s sizzling finish merely isn’t performing. If clogs are a relentless drawback for you, and also you’ve tried every part beneath the solar, swap to a v6 and watch your troubles soften away.

Tech Specs: 

• Temperature Vary: <=300°C (even greater with a thermocouple)
• Filament Dimension: 1.75mm or 3.00mm
• Nozzles: 1
• Building: All-metal
• Drive system: Bowden or Direct

E3D Lite6 HotEnd

In case you’re on the lookout for a primary sizzling finish that may print PLA or ABS filament, the Lite6 is a less expensive different to the v6. It’s acquired PTFE components, so it prints as much as 245°C. It seems to be virtually an identical to the v6, however the warmth sink has a barely completely different form and the fan shroud is a unique coloration.

E3D Lite6 HotEnd

E3D Cyclops HotEnd

For dual-extrusion printing with a lighter sizzling finish, the Cyclops is a novel setup. It options two inputs for 2 completely different colours of filament, and one output. That is helpful for machines like delta printers the place further weight on the tip effector platform can negatively have an effect on prints. Temperature is shared, so just one sort of filament (e.g. PLA) can print at one time.

Cyclops is the one system from E3D that makes use of its personal sort of nozzles, which aren’t suitable with the opposite sizzling ends.

E3D Cyclops HotEnd

Tech Specs: 

• Temperature Vary: <=300°C (even greater with a thermocouple)
• Filament Dimension: 1.75mm solely
• Multi-extrusion: 2 filaments of the identical sort
• Nozzles: 1
• Building: All-metal
• Drive system: Bowden solely

E3D Chimera HotEnd

For multi-extrusion printing with the power to individually management temperatures on every of the 2 nozzles, the Chimera is what you need. One massive warmth sink cools the chilly part for each extrusions, which can be utilized to print completely different colours or kinds of filament.

E3D Chimera HotEnd

Tech Specs: 

• Temperature Vary: <=300°C (even greater with a thermocouple)
• Filament Dimension: 1.75mm solely
• Multi-extrusion: 2 differing kinds or colours of filaments
• Nozzles: 2
• Building: All-metal
• Drive system: Bowden solely

E3D Kraken HotEnd

The Kraken has 4 inputs and outputs for the final word multi-extrusion expertise. It’s water-cooled, so it doesn’t use any followers like the opposite sizzling finish methods from E3D. Assist for this technique continues to be fairly restricted, although, and is beneficial just for superior customers.

E3D Kraken HotEnd

Tech Specs: 

• Temperature Vary: <=300°C (even greater with a thermocouple)
• Filament Dimension: 1.75mm solely
• Multi-extrusion: 4 differing kinds or colours of filaments
• Nozzles: 4
• Building: All-metal
• Drive system: Bowden solely

E3D Volcano HotEnd Improve

To print extra filament, sooner, you need the Volcano. Not technically its personal sizzling finish system, it’s an improve to the v6, Chimera, or Kraken, however positively value mentioning. The warmth block and nozzle are each larger, so you may feed extra filament by way of at a faster charge.

E3D Volcano HotEnd Improve Package

Conclusion

In case you’re after high-quality prints, the E3D HotEnds are the only option! As at all times, we’re comfortable to reply any questions you could have, and sit up for serving to you with all of your printing wants.