3D file United States 105mm M456A1 HEAT Projectile 🔫 ・3D printable mannequin to obtain・Cults

Made by request!

Full measurement duplicate of the M456A1 HEAT projectile fired by the 105mm M68 cannon used within the M60 tank, early M1 Abrams and upgraded M47 + M48 Patton tanks. It is usually capable of be fired from different 105mm-armed NATO tanks and armoured automobiles such because the Leopard 1, AMX-30, upgraded Centurions, Strv-103 and likewise within the early Mk I and Mk II Merkavas.

Detailed with cap, driving band, six-vaned tail, with a tracer unit within the base and two printable stencils for the markings.

Please remember that the tracer barely extends out of the tail – if you’re aspiring to show the shell standing will probably be unstable, so it’s higher to print the choice flat-base tail file which omits the tracer. Additionally there’s a small hole between the physique and backside of the driving band – that is regular and is on the actual
projectile as nicely.

Approx. full dimensions: 648mm (25.5″) excessive and 108mm (4.25″) max diameter.

Nice for collectors or to make use of in re-enactment!

Yow will discover my projectiles + case filler assortment right here on Cults!

(Word: This can be a beauty imitation solely, it can’t operate or be made to operate as an actual machine. I’m not liable for any mis-use of the printed gadgets. The renders displaying paint colors and markings are for
illustration functions solely. These recordsdata are bought below the phrases of the Cults Non-public Use license.)

Printer with minimal 200mm Z-axis (peak) construct quantity required!

Roughly 530g of filament is required to print this with the really useful settings.

Advisable settings:

Layers: Use 0.20-0.30mm layer peak for many components and hex rods. The cap and tracer needs to be printed with 0.16mm layers as they’re smaller.

Infill & Partitions: use 3 vertical partitions and three% infill with gyroid or rectilinear sample for many components, and 5% infill for the hex rods, cap and tracer.

Helps: All components are pre-oriented in greatest printing place and don’t require helps.

(Word: the stencils might be reasonably fragile as they’re skinny, so take care when eradicating them from the construct plate).