😇 Genshin Affect – Fractured Halo・ STL File for 3D printing・Cults

This mannequin is reduce into elements and items to slot in a printer with a platform measurement of 200mm x 200mm x 200mm.

There are image with elements and items labeled to their file names within the preview part which you’ll confer with.

I additionally embrace a mixed model of the top and pommel simply in case you want it.

Please observe that this mannequin is NOT and simple mannequin to craft. You will want some ability in PLA welding particularly on half 2 and canopy. Half 5 (the wheel) is maintain solely by the duvet. You must put further work on mixed Half 2 and canopy collectively (See image 3), so it may be robust sufficient to carry the wheel and blade. In the event you do not want the wheel to be movable, you possibly can glue every little thing collectively and it must be simpler and stronger in total.

You will want 10 copies of blade to finish the wheel. There are built-in peg on the blade and cavities on Half 5 use as information to put in the elements. If assist is utilized on the cavities and peg, please eliminated completely for a smoother set up.

There are tunnels with diameter of 5mm and 10mm punched on the mannequin for alignment and bone set up functions. I take advantage of sectional tunnel as an alternative of a curved tunnel as it’s simpler to put in. In the event you want a curve tunnel, I can customized made it with further cost.

There’s a image with tunnel size labeled that you would be able to confer with when getting the bone you want. Please observe that, this dimension is all in DEFAULT scale, which is 100%. In the event you scale the elements, the size is utilized to the tunnel as properly.

The pommel is kind of easy to craft.

With the intention to be part of the top and pommel, you want a pole with diameter of 25mm. You possibly can verify the dimension and use the pole with size that may obtain the entire size you desired.

For scaling, please use the identical scale for all of the elements and items.

Cheers and Pleased Printing!

Dimension: –
Head: 501.92mm x 294.81mm x 60mm
Pommel: 432.73mm x 87.02mm x 45.70mm