🔌 XYZ with +/- 3D coordinate system for CNC assortment・ STL File for 3D printing and CNC machining

There are such a lot of XYZ-coordinate instruments round and none appear that will help you with orienting the with the optimistic or damaging instructions. So I made that is the visualization device in case you have hassle orienting the path of the XYZ-coordinate system.

Each printer can print this axis system. AMS printers work finest for the Y and C-axis I made each shade at a special layer so you may swap out filament. It additionally works to preserve pooping in case you have an AMS printer.

I made this assortment so you may have all 3 variations in a single bundle. This bundle incorporates the standing axis device for milling, the magnetic device for milling and the magnetic device for turning.

For the standing axis device for milling. There are two variations of the bottom. One model with C-axis. Or if you do not have a C-axis or to preserve materials in case you have a pooping printer, or if solely acquired a single materials printer, I made a model of the bottom with out the C-axis.

0.2mm layer peak extremely really helpful.

Pause the cross at layer 21 to drop within the magnets

I like to recommend to make use of crimson, inexperienced and blue so the axis are very easy to learn they usually mirror how it’s on most 3D -software

When you have an AMS printer ensure you shade the again/mattress facet of the Y-axis. Additionally shade the perimeters of the letters within the embossing for the cleanest outcomes.

If you do not have an AMS these are the layer swaps:

Milling device
– Cross
Black to start out
Crimson at 26
Blue at 29
Black at 31

-Y axis
Black to start out
Inexperienced at 26

Turning device
-Black to start out
-Blue at 26
-Crimson at 29