🐢 Cute Little Turtle Clicker / Fidget Turtle STL File – NO AMS

Cute Little Fidget Turtle – Multi-Half 3D Printable STL (No AMS Required!)

Convey a contact of caprice to your desk with this cute little Turtle—designed to be greater than only a show piece! This enjoyable and purposeful mannequin incorporates a house for a clicker that works with most traditional key switches, making it an ideal fidget toy or desk companion.

No AMS? No drawback! This easy-to-print, single-extruder-friendly design assembles shortly with out the necessity for multi-color printing. Wish to use your AMS? A separate AMS-ready mannequin can also be included!

Licensing:
Wish to promote your creations? You’re coated! This STL file comes with a life-time business license, so you’ll be able to print and promote with confidence.

Options:
– NO AMS REQUIRED: No AMS? No drawback! Designed to work fantastically on single-color printers with out the necessity for an Automated Materials Switching (AMS) system. All colours print individually as items. A totally assembled STL model can also be included if you happen to would like utilizing an AMS. You may simply paint the components in slicer.
– Match Collectively Items: As this was designed for single coloration printers, all items will match collectively. Nevertheless, glue is really helpful to carry the mannequin collectively completely.
– Good for Items & Decor: Brighten up your desk, desk centerpieces, or your 3D print store!
– Industrial License Included: Print and promote as many as you’d like!
– Keychain Possibility Included: A second shell possibility is included with keychain attachment holes.

SAFETY NOTE:
This mannequin accommodates small components which will current a choking hazard. It’s not appropriate for younger youngsters or pets.

Whether or not you are printing for your self or your store, this little Turtle is certain to be a success!

Assembled Dimensions:
Peak: Approx 2.26”
Width: Approx 1.98”
Depth: Approx 2.28″

PLEASE NOTE:
Print tolerances could differ by printer. The settings used on this print had been in Bambu Studio, and printed on a Bambu X1C utilizing a 0.4 nozzle printed at 0.20mm Customary settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Advisable Print Settings:
– Helps – YES
– Help Sort – TREE SLIM
– Helps on Construct Plate Solely
– Threshold Angle – 30 levels
– Take away Small Overhangs – NO
– Brim – NO – however really helpful for small items or when you have adhesion points
– High Z-Distance – .28 IMPORTANT
– Backside Z-Distance – .28
– Layer Peak – 0.2mm or smaller
– Nozzle Measurement – 0.4 or smaller
– Seam – Nearest
– Infill – 15%
– Infill Sample – Gyroid
– Wall Loops – 2

Print Occasions with settings above:

1. Physique, Head – Approx 1hr 8 min
2. All Eyes Elements – 18 min
3. Shell – 21 min
4. Stomach – 5.25 min