⚽ Muffler for .50cal T4E Tuning barrels・Free STL File for 3D printing・Cults

This can be a printable muzzle attachment for the .50cal T4E tuning barrels. It has an M15x1 thread.

By no means connect this on an enormous bore airgun or on an actual firearm, the printed half cannot deal with it. Paintball and related use solely.

The attachment ought to solely be used with prime quality projectiles. The half can break if the balls or slugs aren’t flying straight. It is usually advisable to make use of it with low-powered settings solely as elevated stress may be an excessive amount of.

The scale of the mannequin is 45mm x 130mm.

No {hardware} wanted.

PRINTING

The mannequin comes within the advisable orientation for printing.

Robust tree helps must be enabled for the thread portion. One of the best ways to do that is to both paint them manually or to allow helps for the complete mannequin and add a help blocker for the higher portion. The helps can then be eliminated by forcing a flat head screw driver into the underside and screwing the construction out.

The higher components of the attachment shouldn’t be supported. It has been designed in a print-friendly manner and eradicating the helps can be very troublesome if not unattainable.

POST-PROCESSING

In a great scenario no cleansing up of the half is required. In case your printer decides to flip a finger at you and the thread would not print nicely, you may repair it with an M15x1 faucet.

WARNING

Don’t use this attachment in case your native legal guidelines forestall you from utilizing such an merchandise in your marker. As a result of inside form, some international locations would possibly think about this merchandise a suppressor or a silencer, although it cannot be used on a firearm. Obey your native legal guidelines and tips.